Wacker Neuson G 70 Návod k obsluze stáhnout pdf (Strana 56)

wc_tx003553gb_FM10.fm

Rammer

Maintenance

Continued from the previous page.

2. Remove the main paper filter element (b), foam prefilter (c), and foam discharge

filter (d) and inspect them for holes or tears. Replace the element and filters if

they are damaged.

3. Replace the main paper filter element (b) if it appears heavily soiled.

4. Clean the foam prefilter and foam discharge filter (c, d) with low-pressure

compressed air. If the filters are extremely soiled, wash them in a solution of

mild detergent and warm water. Rinse the filters thoroughly in clean water. Allow

them to dry thoroughly before re-installing.

Note: Do not oil the foam prefilter or the foam discharge filter.

5. Wipe out the filter housing (e) with a clean cloth. Do not use compressed air.

NOTICE: Do not allow dirt to get into the engine intake port (f) while cleaning.

Damage to engine will result.

6. Check that the precleaner debris ejector port (g) is clear.

Result

The air cleaner has now been serviced.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 85 86

Žádné komentáře

Wacker Neuson G 70 Návod k obsluze Strana 56