Wacker Neuson BPU 3050A Návod k obsluze

Operator´s ManualVibratory plateBPU 3050A0203080en 00204.2008

TD00611GB8TECHNICAL DATABPU 3050AItem no. 0008763 ...Advance and reverse travel m/min: 21Compacted area m2/h: 630Operating weight kg: 166Power transmi

T00855GB9DESCRIPTIONApplicationsThe machine is perfectly suited for the compaction of all types of soil including semi-cohesive soils in trenchand sur

T00855GB10DESCRIPTIONDescription of functionThe vibration required for compaction is produced by the exciter (5) which is firmly joinded to the lower

T00856GB11TRANSPORT TO WORK SITE, RECOMMENDATIONS ON COMPACTIONTransport to work siteConditions:- To transport the vibration plate, use only suitable

T00857GB12OPERATIONEngine check before starting1. Oil level checkInsert dipstick in oil filler neck, but without screwing in. If oil level is low, fil

T00857GB13OPERATION3. Pull the throttle lever (6) back slightly.4. Turn the engine switch to the „I“ position.5. Pull the starter grip lightly until r

T00857GB14OPERATIONOperation the engineAs the engine warms up, gradually move the choke lever to the OPEN position.Position the throttle lever for the

T00857GB15OPERATIONStopping the engineTo stop the engine in an emergency, turn the engine switch to the „0“ position.Under normal conditions, use the

T00858GB16MAINTENANCEMaintenance schedule Parts Maintenance jobs Maintenance intervalAir filter Check for external damage and tight fit. dailyCheck fi

T00858GB17MAINTENANCEEngine oilCheck oil level:The engine must be horizontally place when filling in oil orchecking the oil level.Check oil level with

T00858GB18MAINTENANCEHydraulic controlCheck oil level:1. Move centre pole into vertical position.2. Push operating control handle (7) to forwardtravel

T00858GB19MAINTENANCEFuel strainer cup cleaningTurn the fuel valve to Off. Remove the sediment cup and O-ring, and wash them in nonflammable or high f

T00858GB20MAINTENANCEAir filter serviceA dirty air filter will restrict air flow to the carburettor. To prevent carburettor malfunction, service the a

T00849GB21FAULTSReverse speed too lowCause: - Too little hydraulic oil in the centre pole head.- Air in hydraulic control.Remedy: - Top up hydraulic o

22

C0008207.GB.fmEC - CONFORMITY-CERTIFICATEWacker Construction Equipment AG, Preußenstraße 41, 80809 Münchenhereby certify that the construction equipme

24

Prüf- und Zertifizierungsinstitut VERBAND DER ELEKTROTECHNIKELEKTRONIK INFORMATIONSTECHNIK e.V.C E R T I F I C A T ERegistration-Number: 6236/QM/06.97

Wacker Construction Equipment AG - Preußenstraße 41 - 80809 München - Tel.: +49-(0)89-3 54 02-0 - Fax: +49-(0)89-3 54 02-390Wacker Corporation - P.O.

H00611GB1CONTENTSType Item no.BPU 3050A 0008763 ...This machine has been equipped with an EPA certified engine.Additional information can be found in

2

T00778GB3FOREWORDForewordFor your own safety and protection from bodily injuries, carefully read, understand and follow the safety instruc-tions in th

4TABLE OF CONTENTSFOREWORD 3SAFETY INSTRUCTIONS 6General instructions 6Operation 6Safety checks 7Maintenance 7Transport 7Maintenance checks 7TECHNICAL

5TABLE OF CONTENTSFAULTS 21Reverse speed too low 21Forward speed too low 21No advance 21Loss of hydraulic oil 21Engine does not start 21EC - CONFORMIT

SV00019GB6SAFETY INSTRUCTIONSSAFETY INSTRUCTIONS FOR THE USE OF VIBRATORYPLATES WITH COMBUSTION ENGINESGeneral instructions1. Vibratory plates may onl

SV00019GB7SAFETY INSTRUCTIONS12. Make sure the soil or subsoil to be compacted has a high enough load carrying capacity.13. Use appropriate protective